How do you get the perfect coffee every day? With a good coffee machine. The Bezzera Magica S Pid has an in-built heat exchanging system that can multi-task. With its exciting new technology, this coffee maker is all you need to make your day better!
FEATURES: Heat-exchanging system: The boiler in this coffee maker can steam milk and make espresso simultaneously. PID: This machine has a PID device with a controller that lets you regulate the temperature. Gauges and Pump: The professional manometers and vibratory pumps help in the extraction process. Solenoid valve: This 3-way Solenoid valve prepares the machine for the next cycle by releasing pressure and removing water from the group head. Joystick knobs: Unlike old-fashioned coffee machines that had handles, this one has joystick-shaped knobs. These knobs turn on/turn off instantly, without any effort. Auto-refill feature: This unique feature of this machine ensures that you get a steady supply of fresh coffee during parties and gatherings.
WHAT’S IN THE BOX
Bezzera Magica S PID
Single Spout Portafilter
Double Spout Portafilter with baskets
HOW TO USE
How to setup:
Add filtered water in the detachable front loading reservoir tank of your coffee machine.
Plug in your machine, switch it on with the help of the button on the side. The boiler will automatically start heating up the water.
Flush the group head 2-3 times to make sure that the boiler is full.
You will know the coffee machine is ready for use when temperature display reads around 90 degree celcius.
How to make Espresso, Americano, Milk beverages and Teas:
The base for good coffee beverages is espresso, once that is dialled in you make now make all kinds of coffee with your espresso machine.
Starting with a Brew Ratio of 16g of ground coffee to 32-38g of extraction in 18-24 seconds, and engage the brew paddle, once you are done pulling the shot put the joystick back in its original position.
If the shot is finishing too quickly, adjust the grinder to a finer grind size. If the shot is taking too long to finish, adjust the grinder to a coarser grind size. Pull the shot following the same parameters. Taste the Espresso shot.
If the Espresso shot tastes under extracted, i.e., overpowering acidity (sourness) and astringency, the grind size is too coarse and the flow rate is high. Adjust the grinder to a finer grind size and pull an Espresso shot. Taste the shot.
If the Espresso shot tastes over extracted, i.e., ashy, smoky flavour that goes hand in hand with a lack of any lingering finish of the espresso in the mouth, the grind size is too fine and flow rate is slow. Adjust the grinder to a coarser setting and pull an Espresso Shot. Taste the shot.
If there is a balance between the acidity, sweetness, bitterness and complexity, your Espresso is dialled in and you can continue to use these parameters.
Take a mug and place it under the hot water dispenser of your coffee machine, turn the joystick for hot water and fill your mug upto 3/4th capacity and press the button again to shut the water off.
Once water is dispensed, pull an espresso shot on top of the hot water. Your hot Americano is now ready
For Lattes and Cappuccinos:
Take chilled milk in a milk steaming pitcher.
Pull an espresso shot into your mug.
Purge the steam wand. Insert the wand into the milk pitcher at the correct angle and begin steaming the milk. The desired texture should be silky with tiny micro bubbles formed uniformly throughout.
Clean the steam wand using a damp sponge. Purge the wand once more.
Tap the pitcher on the counter to settle the microbubbles and give it a swirl.
Pour the steamed milk into the pulled espresso shot creating the desired latte art.
For Iced Coffee:
In a glass, add a few cubes of ice. Pour in cold milk, and add a shot of espresso on top to make a layered iced coffee.
You can add flavours like hazelnut, caramel, chocolate etc. to make a flavoured iced coffee.
Take a mug and place it under the hot water dispenser of your coffee machine, press the hot water button and fill your mug up to 3/4th capacity and press the button again to shut the water off.
Immerse your tea bag in the mug and set the timer and let it brew for 3-5minutes. Fill the rest with hot water.
How to clean your Bezzera Magica S PID Espresso Machine:
On a daily basis it’s important to wipe down the porta filter, group head and steam wand of your coffee machine.
For deep cleaning of your machine (at least once in two weeks) the group head and milk steaming wand should be cleaned using appropriate coffee machine cleaning chemicals.
Back flushing the Espresso Machine is best done when the machine is hot
Using the group head brush, clean the screen thoroughly to remove any coffee grounds.
Place the blind basket in your porta filter and add one cafiza tablet to it. Load it to the group head.
Move the joystick to brew mode for 10 seconds, repeat this process three times.
After this, remove the porta filter and run water through the group head to rinse, then reload the rinsed porta filter into the group head and repeat the process 3 times without any chemical.
Empty out the drain tray and rinse it under running water.
For the steam wand, add a cap of rinza liquid to half a pitcher of room temperature water and start the steam wand till the water warms up.
Remember to dispose an espresso shot the next time you brew as it might have some chemical residue in your coffee machine.
Three-Way Solenoid valve
Basket Size ( portafilter )
PID ( Yes / No )
240 V 50-60Hz
Dimensions WxHxD (cm)
Height: 31.5 cm,Width: 30cm
Country of Origin
SHIPPING & RETURNS
We have partnered with various courier services to fulfill your order. If we receive an order after 2:00 pm, then the next day will be considered as the first day of delivery/shipping duration. Our delivery service partners work on all days of the week but we do not guarantee delivery on Sunday and on any holidays.
Please reach out to us within 7 days of receiving your product if you would wish to return/exchange it. We shall initiate the pick-up of your product and initiate your refund/exchange post inspection of the product by our technical team. Refunds/Exchanges are only applicable under the below conditions
If there is any manufacturing defect which is hampering the optimal intended use of our products.
If you have received the product in a damaged condition; in this case, you need to inform us about the condition along with images within 24 hours of receipt of your order by you.
The following shall not be eligible for return or replacement:
Damages due to misuse of the product
Incidental damage due to malfunctioning of product
Any consumable item which has been used/installed
Products with tampered or missing serial/UPC numbers
Any damage/defect which is not covered under the manufacturer's warranty
Any product that is returned without all original packaging and accessories, including the box, manufacturer's packaging if any, and all other items originally included with the product/s delivered
Charges for value-added services like express delivery, gift wrapping, personalization etc are non-refundable.
Please ensure that product is in unused and original condition which includes all price tags, labels, accessories, original packing and the invoice along with the product. And in the case of any manufacturing defects, we require the original packing, accessories and invoice even though the product may have been used by you.