The Sette Series has, at its core, a revolutionary grinding mechanism that produces game-changing performance. If you want high-speed, precision grinding, look no further than the Sette 30.
Perfect for entry-level at-home grinding, this award-winning device is perfect for an incredible range of brewing equipment. It has a digital timer and 30 grind settings. The Sette 30 has an adjustable device holder so you can directly fit in a portafilter or any other container of your choice.
Your prep work is a breeze with the convertible device holder that lets you grind directly into a portafilter or switch to grind into a static-reducing grounds bin. You may also find some single-cup brewing methods to fit just right and maximize your routine.
Features:
Design:So the big innovation in Sette grinders is their straight thru design. That setup allows for the straight thru design with very low grind retention and high-speed grinding. In fact, the Sette grinds at 3.5 to 5.5 grams per second.
Cleaning:The cone burr is easily removable with no tools, making cleaning very easy.
Low Retention Grinder:A grinder with minimal retention will help you marginally reduce waste by reducing the need for a purge.
Programmability:On the 30, you set one grind time in hundredth of second intervals up to ten seconds and then a tenth of second increments for times over ten seconds.
Portafilter Accommodation: Sette 30 accommodates portafilter and grinds bin. The plastic support forks are adjusted by pulling them out and re-inserting.
Dimensions:The Sette 30 is designed with a small footprint and fits under standard kitchen cabinets.
Digital Control Panel:TheSette 30 has a simple front-mounted control panel with easy to read backlit LED display. The user manually presets the grind time to within 0.1 seconds. Simply press the start button and the Sette automatically delivers precise dosing.
WHAT’S IN THE BOX
Grinder
Quick Start Guide
Hopper
Allen Key
Cleaning Brush
Rubber Gas Kit
HOW TO USE
How to setup:
Open the box, you will find a setup manual which is very handy for reference.
Remove bean hopper and lid from the plastic cover and remove the protective plastic film from the lid.
Wash the hopper, lid and the removable grounds bin in warm water and air dry them completely.
On top of the grinder, there will be a silica gel packet kindly discard the same.
Place the hopper on top of the grinder and turn it clockwise.
Plug the grinder in.
How to Calibrate:
The Baratza Encore has around 31 grind settings that you can calibrate, with 31 being the coarsest.
We would suggest to take around 100gms of beans and grind just a few at a time at different sizes. This will season the burrs inside and also help you calibrate at the same time. The espresso grind setting in generally around 9.
Starting with a Brew Ratio of 16g of ground coffee to 32-38g of extraction in 18-24 seconds, pull a shot of Espresso.
If the shot is finishing too quickly, adjust the grinder to a finer grind size. If the shot is taking too long to finish, adjust the grinder to a coarser grind size. Pull the shot following the same parameters. Taste the Espresso shot.
If the Espresso shot tastes under extracted, i.e., overpowering acidity (sourness) and astringency, the grind size is too coarse and the flow rate is high. Adjust the grinder to a finer grind size and pull an Espresso shot. Taste the shot.
If the Espresso shot tastes over extracted, i.e., ashy, smoky flavour that goes hand in hand with a lack of any lingering finish of the espresso in the mouth, the grind size is too fine and flow rate is slow. Adjust the grinder to a coarser setting and pull an Espresso Shot. Taste the shot.
If there is a balance between the acidity, sweetness, bitterness and complexity, your Espresso is dialled in and you can continue to use these parameters.
How to Clean:
On a daily basis, make sure to not leave any coffee in the hopper.
Clean the hopper and ground bin with a cloth post use.
You can even remove the burr set by moving the adjustments fully to the left and it will just pop out in your hand.
In order to make sure that your grinder is not clogging or doesn’t have oil build-up overtime. Use products like Grindz by Urnex to deep clean your burrs from inside.
SPECIFICATIONS
Electric/Non Electric
Electric
Can grind for Espresso
Yes
Can grind for manual brewing methods
Yes
Grind speed
Espresso 3.5g/sec—Manual Brewing 5.5g/sec
Burr specs
40 mm conical Steel by Etzinger
Bean Hopper Capacity
300-400 g ( 10 oz )
Grounds Bin Capacity
160g ( 5.5 oz )
Power Rating
220-240VAC 50/60 Hz, 240W 1.6A, class I 100-120VAC 50/60 Hz, 200W 2.6A
Country of Origin
Taiwan
Weight
3.2 kg ( 7lbs )
Dimensions WxHxD (cm)
13 x 40 x 24
Colour
Black
SHIPPING & RETURNS
We have partnered with various courier services to fulfill your order. If we receive an order after 2:00 pm, then the next day will be considered as the first day of delivery/shipping duration. Our delivery service partners work on all days of the week but we do not guarantee delivery on Sunday and on any holidays.
Please reach out to us within 7 days of receiving your product if you would wish to return/exchange it. We shall initiate the pick-up of your product and initiate your refund/exchange post inspection of the product by our technical team. Refunds/Exchanges are only applicable under the below conditions
If there is any manufacturing defect which is hampering the optimal intended use of our products.
If you have received the product in a damaged condition; in this case, you need to inform us about the condition along with images within 24 hours of receipt of your order by you.
The following shall not be eligible for return or replacement:
Damages due to misuse of the product
Incidental damage due to malfunctioning of product
Any consumable item which has been used/installed
Products with tampered or missing serial/UPC numbers
digital products/services
Any damage/defect which is not covered under the manufacturer's warranty
Any product that is returned without all original packaging and accessories, including the box, manufacturer's packaging if any, and all other items originally included with the product/s delivered
Charges for value-added services like express delivery, gift wrapping, personalization etc are non-refundable.
Please ensure that product is in unused and original condition which includes all price tags, labels, accessories, original packing and the invoice along with the product. And in the case of any manufacturing defects, we require the original packing, accessories and invoice even though the product may have been used by you.
